Search
Stay up to date and receive our Newsletter
All papers | Recent papers
A Novel Model for Drying Refractory Castables
Jürgen Pötschke
Volume 2, Issue 2, Pages 99-106
Keywords: drying, spalling, refractory castables, heating rate, temperature conductivity, calculation of drying parametersrnrn
Abstract | References | Full Article
A View in the Future of the Melting Technology and Refractory Materials for the Glass Industry
Volume 2, Issue 2, Pages 69-74
Keywords: Submerge combustion melter, rnsegmented thin film melter, glass melt, corrosion of refractories, infiltrating and refining of rnrefractoriesrnrn
Actual Trends for the Tundish Refractory Lining
Volume 3, Issue 3, Pages 6
Additives for High Purity Reduced Cement Castables
G. Assis, H. Fryda, S. Li, C. Parr
Volume 2, Issue 3, Pages 87 - 92
Keywords: alumina, low cement castables, placing properties, additives, water demand, flow properties, hardening properties
Advantages of Liquid Phosphate Bonded Refractories
J. Decker
Volume 2, Issue 1, Pages 89 - 92
Aggregate Effects on the Thermal Shock Resistance of Spinel-Forming Refractory Castables
G.B. Cintra, V.C. Pandofelli, Y.W. Li, M.A.L. Braulio
Volume 2, Issue 3, Pages 102 - 106
Keywords: thermal shock resistance, calcium hexaluminate (CA6), spinel-forming castables
Aggregates for Non-ferrous Applications
C. Parr, H. Fryda, E. Frier, C. Wöhrmeyer
Volume 3, Issue 2, Pages 73 - 78
Andalusite : An Attractive Raw Material for its Excellent Thermal Shock Resistance
M.L. Bouchetou, L. Colombel, P. Hubert, J. Poirier
Volume 1, Issue 1, Pages 93 - 102
Anode Baking Furnaces – Wear of Applied Refractories
Rainer Telle, Thorsten Tonnesen
Volume 1, Issue 2, Pages 84 - 89
Keywords: anode baking process, top ring pit furnace, wear, refractories
Application of Electric Voltages for Improved Protection of MgO Refractory Materials
G. Mori, R.K. Sauerbrey
Volume 2, Issue 1, Pages 105 - 110
Keywords: ceramic electrodes, polarization, cathodic corrosion protection
ATEX – Explosion Protection at any Price? Maximum Protection with Minimum Additional Investments
B. Bass, A. Riley, X. Knöpfle
Volume 3, Issue 2, Pages 79 - 82
Carbstone: Sustainable Valorisation Technology for Fine Grained Steel Slags and CO2*
Volume 2, Issue 2, Pages 75-79
Keywords: Carbonation, steel slag, CO2, recycling
Clay-rich Rocks and Mining Wastes for the Production of Lightweight Aggregates with Thermal Insulation Properties
S. Kavouri, D. Alfieris, E. Tziritis, H. Bedelean, M.G. Stamatakis, M. Gorea
Volume 3, Issue 1, Pages 85 - 93
Keywords: raw material, clayey diatomite, absorption, lightweight, aggregates, insulation
Clayey Diatomite from a Deposit in Central Greece – A Multifunctional Raw Material for Absorption and Insulation
Professor M.G. Stamatakis, Dr G.N. Georgiades
Volume 2, Issue 1, Pages 82 - 88
Colloidal Alumina as a Novel Castable Bonding System
Volume 3, Issue 3, Pages 7
Computer Based Materials Selection for Furnace Walls
Hartmut Krause, Hartmut Kern, Gerd Walter
Volume 1, Issue 2, Pages 74 - 79
Keywords: Industrial furnaces, kilns, walls, material selection, optimisation, minimum overall costs, computer programme, practical application
Contribution to Melt Refinement of Special Steels with Calcium Aluminate in Open Induction Furnaces
Dr.-Ing. Manfred Markworth, Dipl.-Ing. Johannes Schadock, Dr.rer.nat. Johannes Södje, Dr.-Ing. Peter Bartha, Horst Diesing
Volume 2, Issue 1, Pages 72 - 81
Keywords: melt refinement, special steels, calcium aluminate, open induction furnaces, minimizing non-metallic inclusions in high-alloy steel castings, corundum-spinel furnace linings, use of scrap metal
Contribution to the Slagging of MgO in Secondary Metallurgical Slags
C. Brüggmann
Volume 3, Issue 1, Pages 105 - 109
Keywords: ladle slag, MgO saturation, wear and corrosion of MgO refractories
Corrosion Behaviour of Refractory Materials in the Systems Cr2O3and Cr2O3 – Al2O3 against Glass Melts in Subject to their Composition and the Thermal Conditions
M. Freund
Volume 2, Issue 3, Pages 93 - 96
Keywords: corrosion, Cr2O3 refractories, Cr3O3-Al2O3 refractories
Corrosion Mechanisms of Refractory Materials Used in Secondary Metallurgy
Franz Melcher, Harald Harmuth
Volume 3, Issue 1, Pages 99 - 104
Keywords: magnesia chromite bricks, alumina spinel castable, corrosion, ladle slag, RH degasser, ladle, thermochemical calculations, FactSage
Corundum and Bauxite-based Concretes – Non-destructive Testing of Mechanical Properties and its Correlation with the Sintering Process
A. Terzic´, Ljubica Pavlovic´
Volume 2, Issue 2, Pages 80-85
Keywords: ultrasonic pulse velocity, sintering, porosity, refractory concrete, image analysis, creeprn
Cost Effective Process and Quality Control by XRF for better Lifetime of Ceramic and Refractory Products
Karl-Eugen Mauser, Kai Behrens
Volume 1, Issue 2, Pages 96 - 98
Keywords: X-ray fluorescence spectrometry, analytical quality control, process control, centralized calibration
Dispersants and their Effects on Hydratable Alumina Containing Castables
aaaaa, I.R. Oliveira, V.C. Pandolfelli, xxx, I.R. Oliveira
Volume 1, Issue 1, Pages 103 - 109
Dispersion Properties of Colloidal Graphite
E. Salahi, G. Schmidt, H. Majidian
Volume 1, Issue 1, Pages 88-92
Effect of Flake Graphite Size on the Thermal Conductivity of Blast Furnace Carbon Refractories
X. Chen, S. Ge, B. Qiang, Y.W. Li, W. Zhang
Volume 2, Issue 3, Pages 107 - 110
Keywords: carbon refractories, flake graphite size, thermal conductivity, anisotropy
Effects of Microsilica Powder on Microstructure
Effects of Temperature on the Synthesis of SiAlON and SiAlON Composite Material from Aluminium Dross
Volume 2, Issue 3, Pages 76 - 80
Keywords: SiAlON synthesis, aluminium dross, secundary raw materials
ER 2001 SLX – Very Low Exudation AZS Product for Glass Furnace Superstructures
M. Gaubil, C. Morand, I. Cabodi
Volume 3, Issue 2, Pages 83 - 86
Fused Cast AZS Refractory Materials — Structure and Structural Changes during Application
Dipl.-Ing. Bernhard Fleischmann
Volume 2, Issue 2, Pages 63-68
Keywords: alumina-zirconia-silica (AZS) refractories, microstructure, soda-lime-silica glass, glass melting, glass furnaces
Heat Transfer Design Considerations for Refractory Linings with Steel Anchors, Part 2
Tony Howes, Greg Palmer
Volume 2, Issue 3, Pages 97 - 101
Keywords: Heat transfer analysis, refractory linings, steel anchors, 2D and 3D thermal analysis
Heat Transfer Design Considerations for Refractory Linings, Part 1
Volume 2, Issue 2, Pages 94-98
Keywords: Heat transfer, refractory linings, design considerationsrn
Heating Glass during Vacuum Moulding with Porous Burners
Volume 1, Issue 1, Pages 68 - 70
Heating Industrial Furnaces Clean and Efficient
J. G. Wünning
Volume 3, Issue 2, Pages 59 -62
High Temperature Corrosion of Anchor Systems for Refractory
Gangolf Stegh, Wolfgang Bleck
Volume 1, Issue 2, Pages 68 - 73
Keywords: High temperature corrosion, reducing, nitriding, carborizing, sulfidizing, chlorinating, high-alloy steel, nickel-based alloy
Improvement in Dispersion Properties of Graphite Powder by Al(OH)3 Coating through Turbidimetry Measurements
Volume 2, Issue 2, Pages 107-109
Keywords: rngraphite powders, Al(OH)3 coating, mechanical milling, turbidimetryrn
Improving Deskulling Properties of Tundish Linings by some Sulphate Binders
Volume 1, Issue 1, Pages 85 - 87
Investigations on Al2O3-C Refractories with a Self-glazing Effect
V. Roungos, C.G. Aneziris
Volume 1, Issue 2, Pages 145 - 149
Keywords: Alumina, graphite, refractories, carbon-bonded, glaze
Low Temperature Molten Salt Synthesis of Complex Oxide and Carbide Powders and Coatings for Refractory Applications
Shaowei Zhang
Volume 1, Issue 2, Pages 140 - 144
Keywords: oxide powders, carbide powders, coatings, molten salt synthesis (MSS), magnesium aluminate spinel, conventional mixed oxide synthesis (CMOS)
Methods of Assessing Monolithic Refractories for Material
Volume 3, Issue 3, Pages 4
New Binder for Refractory Castables
K. Makuch, A. Rapacz-Kmita, L. Mandecka-Kamien
Volume 3, Issue 1, Pages 79 - 84
Keywords: binder, calcium bialuminate, synthesis, hydraulic properties , admixtures
New Environmentally Friendly Carbon Bonded
Novel Engineered Routes for Advanced Al2O3-MgO Refractory Castables
V.C. Pandolfelli, L.R.M. Bittencourt, S.R. van der Laan, M.A.L. Braulio
Volume 2, Issue 1, Pages 97 - 101
Keywords: spinel, castables, nanoparticles, mineralizers, engineered refractory castables
Novel Fluxing Agents for Ladle Slags to Improve
Volume 3, Issue 3
Prolonging CSN BF2 Refractory Lining Campaign Through
Prospects of Developing Self Glazing Al2O3–C Refractories for Monobloc Stopper Applications
Christos G. Aneziris, Vasilios Roungos
Volume 3, Issue 1, Pages 94 - 98
Keywords: alumina, graphite, refractories, carbon-bonded, glaze, antioxidants
Recycling Spent Aluminum Oxide
Anne Williams, Don McLeod
Volume 1, Issue 1, Pages 83 - 84
Refractory Corrosion in Industrial Waste Incineration Processes
Prof. Dr. Rainer Telle, Dr.-Ing. Thorsten Tonnesen
Volume 1, Issue 1, Pages 71 - 76
Refractory Demands on Inductive Melting of Cast Iron
Volume 3, Issue 3, Pages 8
Refractory Linings in Waste-to-energy Plants – New Developments for Improved Oxidation Resistance
R. Weiss, S. A. Koch, F. Rodrigues
Volume 3, Issue 2, Pages 63 - 68
Refractory Materials and Systems for Incineration Processes
D. A. Jarvis
Volume 3, Issue 2, Pages 87 - 90
Refractory Materials for Casting Manganese Alloyed
C.G. Aneziris, A. Jahn, M. Weider, W. Schärfl
Volume 2, Issue 3, Pages 81 - 86
Keywords: austenitic TRIP steel,manganese, SiO2, refractory, corrosion, cast steel, Bridgman process
Slag Foaming: Fundamentals, Experimental Evaluation and Application in the Steelmaking Industry
T. A. Ávila, P. Bonadia, V. C. Pandolfelli, A. P. Luz
Volume 3, Issue 2, Pages 91 - 98
Spinel: In-situ versus Preformed – Clearing the Myth
Reinhard Exenberger, Christian Rampitsch, Marion Schnabel, Andreas Buhr
Volume 2, Issue 2, Pages 87-93
Keywords: rnspinel, castables, steel ladlernrn
State-of-the-Art Refractory Linings for Float Glass Furnaces
S. Postrach, Bernhard Schmalenbach, Rongxing Bei, Amul Gupta
Volume 1, Issue 2, Pages 80 - 83
Keywords: refractory lining options, float glass furnaces, energy consumption
Studies on MgO-Doped Reaction-sintered ZrO2-Al2O3-SiO2
Synthesis of Molochite Using Fly Ash from Fused Brown Corundum
Quan Zhu, Shengli Jin, Xujuan Dai, Yawei Li, Yuanbing L, Lei Zhao
Volume 3, Issue 1, Pages 77 - 78
Keywords: molochite, fly ash, fused brown corundum
The Development of Improved Lining Material for DRI Shaft Furnaces
J. Sperber
Volume 1, Issue 2, Pages 64 - 67
Keywords: refractory lining, DRI shaft furnace
The Effects of Fine and Ultra-fine Particles on the Design of Refractory Ceramics
J. Poirier, P. Prigent, M. L. Bouchetou
Volume 3, Issue 2, Pages 99 -109
The Impact of Different Additive Systems upon the Properties of a High Purity Low Cement Castable
Chris Parr, Herve Fryda, Jean-Michel Auvray, Genine Assis
Volume 1, Issue 2, Pages 58 - 63
Keywords: refractory castables, reactive fillers, calcium aluminate cement, additives, setting characteristics
The Thermal Insulation of Aluminium Electrolytic Cells
Jorge B. Gallo, Victor C. Pandolfelli, Paschoal Bonadia
Volume 1, Issue 2, Pages 132 - 139
Keywords: aluminium, pot lining, refractory, thermal insulation
Thermal and Thermomechanical Operating Loads on Ceramic Heat Shields in Stationary Gas Turbines and Laboratory Simulation of these Loads
Margarete Neuhaus, Holger Grote
Volume 1, Issue 2, Pages 125 - 131
Keywords: Ceramic heat shields, gas turbines, load simulation, thermal loads, thermo-mechanical operating loads
Thermal Induced Phase Transformations in Mg-PSZ
Thermal Shock Resistant Alumina Based Diesel Soot Particulate Filters (DPF)
Dr.-Ing. W. Schärfl
Volume 2, Issue 1, Pages 102 - 104
Keywords: Diesel soot particulate filters (DPF), aluminabased substrate, ecological alternative, silicon carbide wall flow filters
Tin Bath Bottom Blocks – a Comparison of Refractories of the Systems SiO2 – Al2O3 and CaO – Al2O3
F. Gebhardt, M. Schilling, G. Boymanns
Volume 1, Issue 1, Pages 77 - 80
Unshaped Refractories
Rudolf Krebs
Volume 2, Issue 1, Pages 93 - 96
Keywords: unshaped refractories,testing, standardization
Ways to Reduce the Interaction between Glass Melt and Refractory
H. Hessenkemper, D. Tritschel, R. Weigand
Volume 3, Issue 2, Pages 69 - 72
View the current issueorsubscribe
