The Accelerated Drying of Refractory Concrete – Part 2 Numerical Modelling
1 Palmer Tech Group, New Farm QLD 4005/Australia
2 School of Chemical Engineering, The University of Queensland, St. Lucia 4072/Australia
Volume 6, Issue 4, Pages 89 - 97
The aim of this research is to develop a numerical model that can be used to predict pore pressure within a concrete body and the conditions that can lead to faster, safer heating schedules for refractory dryout. Part 1 of this paper (refractories WORLDFORUM 6 (2014)  75–83) discussed the critical material characteristics that influence the drying or removal of water from a cured (or hardened) concrete body. The current research shows that a material’s permeability is probably the most critical parameter controlling the rate of water removal and internal pore pressure within a porous body. It can be deduced from this that a material’s homogeneity, including PP-fibre dispersement, and installed concrete quality can also play a significant role in explosive spalling.
drying, spalling, refractory, concrete, numerical modelling
 Bazant, Z.P.; Thouguthai, W.: Pore pressure and drying of concrete. J. of Engin. Mechanics Division WM5 104 (1978)  1059–1079  Jansson, R.: Material properties related to fire spalling of concrete, Report TVBM-3143. Lund Institute of Technology 2013  Zhao, J.: Fire-induced spalling modelling of high-performance concrete. PhD Thesis, University Delft, 2012  Bazant, Z.P.; Thouguthai, W.: Pore pressure in heated concrete walls: theoretical prediction. Magazine of Concrete Research 31 (1997)  67–76  Gong, Z.-X.; Majumbar A.S.: A two dimensional finite element model for kiln-drying of refractory concrete. Drying Technology 13 (1995)  585–606  Crowley, M.S.; Johnson, R.C.: Guidelines for installing and drying refractory concrete linings in petroleum and petrochemical units. Amer Ceram. Soc. Bull. 51 (1972)  226–230  Innocentini, M.D.M.; et al.: Drying behaviour of refractory castables. Amer. Ceram. Soc. Bull. 80 (2001)  47–57  Pereria, A.H.A.; et al.: Elastic modulus, dampening and modulus of rupture changes in a refractory castable due to thermal shock damage. 52nd Int. Coll. on Refractories, Aachen, Germany, 2009  Khoury, G.A.; Anderberg, Y.: Concrete Spalling Review, Swedish National Road Administration, June 2000 1–60  Karim, M.M.: Effect of fire flame exposure on some properties of fiber reinforced high strength. J. of Babylon University Pure and Ap plied Sciences 19 (2011)   Canon, J.M.; et al.: Effect of organic Fibre on Permeability of Refractory Concrete. Proc. of UNITECR ‘97, New Orleans, V2, 1997  Taniguchi, T.; Ishikawa, M.: Deformation and fracture of monolithic refractories. Taikabutsu Overseas 5 (1987)   Leonard Krietz, Plibrico personal communication  Bradley, F.; Chaklader, A.C.D.; Mitchell, A.: Thermal stress fracture of refractory lining components: Part III. Analysis of Fracture. Metallurgical Transactions B 18B (1987)
Göller Verlag GmbH